AR 300 SN Central-steering Ride-on Airless Road marking machine

Item number: CMC-L 300 SN

Available in: AT, DE, CH, EU, on request

Weight: 1300 kg

Size: 345 x 110 x 210 cm

NumberPc.

Package: Stk. (1Pc.)

Remember

Request for this article ›

Description

Self propelled ride on road marking machine with hydraulic drive. For street marking in the urban area or on country roads with narrow curves.

Diesel engine:
- power 44 HP
- liquid engine
- external alternator to recharge the battery

Lights, turn signals and turning light

Warning board:
- for operating vehicles with arrow for left/right car overtaking and 2 flashing halogens.

Hydraulic drive with:
- 2 motors directly coupled on rear wheels
- hydraulic negative breaks
- joystick: controls forward, reverse and neutral gear
- variable-flow pump

Parking brake:
- on front wheels

Central Steering
- by hydraulic servo-assisted steering
- brand ZF
- erlaubt auch enge Kurven zu markieren

Steering diameter:
- 6,50 m

Telescopic pointer:
- for easily following pre-marking or precisely matching existing line

Engine shut-off safety device:
- if driver stands up without putting on the hand brake or if someone opens the engine compartment.
- Seat safety device is adjustable on driver weight

Steering-wheel
- with adjustable inclination

Seat:
- with adjustable position (left/right; forward/back)

Paint tank:
- capacity 300 l
- made of stainless steel
- with hydraulic stirrer

Solvent tank:
- for flushing of gun and paint hose

Pressurized glass bead tank:
- capacity 100 l
- With regulator of pressure and moisture separator

Two-stage two-cylinder compressor:
- flow air rate 827 l/min
- with pressure limiting valve

Automatic paint gun:
- with line limiter (shroud), mounted on fixed support with gun height adjustable.
- Fixed support can be replaced with pneumatic support or with marking discs. (Look at optional).
- Standard nozzle for 10-20 cm line

Automatic glass bead gun:
- Diffuser with adjustable slope and adjustable opening angles.
- Closing delay regulator for bead gun

MAX. LINE WIDTH: 90 cm
(achievable only with proper optional equipment)

Electronic spacing device:
- C8000