CMC AR 180 - Road marking machine with different configuration possibilities

CMC AR 180 - Road marking machine with different configuration possibilities

Item number: CMC-AR180
Available in: AT, DE, CH, EU, on request
Weight: 825 kg
Size: 220 x 90 x 185 cm
NumberPc.
Package: Stk. (1Pc.)
Remember
Request for this article ›

Description

Self-propelled ride-on airless machine for work where a large paint capacity, high marking performance and stability must be guaranteed with a compact 4-wheel ride-on machine. The self-propelled ride-on marking machine with hydraulic drive can be individually configured.

Petrol engine:
- Power 27 HP
- External generator for charging the battery
- Centrifugal disk

Light, blinker and rotating beacon

Hydraulic drive with:
- 2 motors directly coupled to the rear wheels
- Joystick: forward, reverse and neutral gear control
- Pump with variable flow rate

Hydraulic oil cooler

Line/gap automat:
- C9000 with pump stroke measurement or

RMCD - Road Marking Control Device
Probably the easiest to operate system for road marking!
With high-resolution color display and the unique RMCD-Drive!

See our YouTube videos and the link to the RMCD website.

2 parking brakes:
on the front wheels

Steering:
on the front wheels

Steering radius:
6,7 m

Telescopic visor
for simple pre-marking or precise re-marking of existing lines.

Automatic engine shutdown
when the driver stands up without applying the handbrake.

Seat
with adjustable position (left / right, forwards / backwards)

Sun canopy

Paint container:
- Capacity 150 l
- made of stainless steel
- with manual agitator

Solvent container:
for rinsing the guns and paint hoses

Pressure tank for glass beads:,
- Capacity 35 l
- With pressure regulator and moisture separator

Airless hydraulic piston pump:
- Max. Vol. flow rate 8.9 l / min

Two-cylinder compressor:
- Flow rate 515 l / min
- with pressure relief valve

Automatic gun:
mounted on fixed L-beam (with adjustable height). Standard nozzle for 10-20 cm line. Line width can be adjusted from 10 cm to 30 cm by changing the nozzle and/or adjusting the gun height.

High pressure color filter

Automatic glass bead gun:
Diffuser with adjustable inclination and opening angles. Closing delay regulator for bead gun

MAX. LINE WIDTH:
90 cm (only possible with suitable accessories)

Electronic line/gap automat C8000 with:
- Possibility to select 8 different presets
- Possibility of recording: Total counter (marked line + unmarked intermediate piece); Total meter of marked line
- soundSpeedAlarm: Sounds when the speed falls below the minimum speed or exceeds the maximum speed. Minimum and maximum speeds can be set. (To ensure a uniform layer thickness of the marking material).
- Allows up to 3 guns to be controlled (if machine is equipped with 3 guns)

Links, Downloads and Stories! (35)

This could be interesting as well!

Accessories

Spare parts

Last Seen

Article has been added!

We also recommend the following accessories:
    Continue shopping › Cart (0)