RMCD - Paint gun plug-in filter 100 mesh (yellow)

Item number: RMCD-FM2004

Available in: AT, DE, CH, EU, on request

Size: 105 x 10 mm

NumberPc.

Package: Stk. (10Pc.)

Remember

Request for this article ›

Description

10 gun filters 100 mesh for marking PU paints or other low-viscosity marking paints.

- 10 gun filters
- 1 piece of springs (for a secure hold in the gun)

Made in EUROPE!

Installation instructions:

Only use intact gun filters! Make sure that the spring is fitted to hold the filter properly.

Observe the correct installation direction of the filter. The air flows around the filter from the outside and filters inwards.
This also makes cleaning easier.

Installation:
- Push the spring onto the short end of the gun filter.
- The installation direction of the filter is essential for the gun to function properly.
- Screw the filter holder into the gun and tighten it.

Packaging:
- In intelligent cardboard packaging. Can also be opened and closed with gloves.
- The springs are packed separately in a paper bag.
- No more blister packaging, which is difficult to open on the construction site.

MADE in EUROPE