CMC AR 30 Pro-2C - Airless road marking machine with 2 diaphragm pumps 5,9 L/min and Hondamotor
Description
Hand-held road marking machine with 2 colors. To mark wide lines with one colour or to mark two lines with different shades under once. Also ideal for 1:1 spray plastic (note the special 1:1 gun) Equipped with 2 diaphragm pumps.
Petrol engine:
- Honda model
- Power 6 HP
- Manual starter
Hand-operated machine:
It is also possible to equip the AR 30 Pro with the HMC or HMC-C, a hydraulic drive carriage. (See the following articles)
Parking brake
on the rear wheel
Adjustable front wheel,
to mark tight radii. It can be locked or unlocked during work by a lever on the handlebar. The steering hardness can be adjusted by a separate regulator
Telescopic visor
for easy initial marking or precise re-marking of existing lines
Handlebar
is adjustable in height
Two holders for paint buckets
(diameter max. 32 cm)
Double airless diaphragm pump:
- max. operating pressure 210 bar
- max. volume flow 2 x 5,9 l / min
- with two pressure valves for independent pressure control of each pump
Two removable paint guns:
These can be used as a manual gun for stencils or surface markings, or by a trigger handle as a gun for lines. Standard nozzle for 10-20 cm line. (Line width can vary from 5 cm to 30 cm by changing the nozzle and/or adjusting the gun height).
Marker with wheel
to keep the distance between the paint gun and the roadway the same
Two high pressure paint filters
Two paint hoses with 7 meters length
MAX. LINE WIDTH:
50 cm (possible with two guns in one pass - if both are loaded with the same paint).
Links, Downloads and Stories! (4)
This could be interesting as well!
-
![Kit for 1:1 external mixing - coldsprayplastic (manual gun and support)]( "Kit for 1:1 external mixing - coldsprayplastic (manual gun and support)")
CMC-KIT11AR30Package: Stk. (1Pc.) -
![CMC AR 30 Pro - Airless road marking machine with diaphragm pump 5.9 L/Min]( "CMC AR 30 Pro - Airless road marking machine with diaphragm pump 5.9 L/Min")
CMC-MTLAR30PROPackage: Stk. (1Pc.) -
![CMC - HMC drive carriage with hydraulic drive for road marking machines]( "CMC - HMC drive carriage with hydraulic drive for road marking machines")
CMC-HMC-BPackage: Stk. (1Pc.) -
![CMC AR 30 ProP-2C - Airless road marking machine with 2 piston pumps 6.17 l/min]( "CMC AR 30 ProP-2C - Airless road marking machine with 2 piston pumps 6.17 l/min")
CMC-MTLAR30PRO-P-2CPackage: Stk. (1Pc.) -
![CMC - CM 300 demarcation milling machine 20 cm]( "CMC - CM 300 demarcation milling machine 20 cm")
-
![Von Arx - FR 200 with petrol engine Honda]( "Von Arx - FR 200 with petrol engine Honda")
-
![Von Arx - VA 25 S with Honda petrol engine]( "Von Arx - VA 25 S with Honda petrol engine")
-
![Manual airless gun for 1:1 coldsprayplastic]( "Manual airless gun for 1:1 coldsprayplastic")
-
![Pneumatic wheel (front wheel) 8/3.00X4]( "Pneumatic wheel (front wheel) 8/3.00X4")
-
![Suction valve complete]( "Suction valve complete")
-
![Pressure regulator valve complete]( "Pressure regulator valve complete")
-
![Ball valve complete (return valve)]( "Ball valve complete (return valve)")
-
![Diaphragm pre-mounted for AR 30]( "Diaphragm pre-mounted for AR 30")
-
![Support for Diaphragm]( "Support for Diaphragm")
-
![Set of suction hose and circulation hose]( "Set of suction hose and circulation hose")
-
![ball valve 3/8'']( "ball valve 3/8''")
-
![Manometer / Pressure gauge 400 bar]( "Manometer / Pressure gauge 400 bar")
-
![Copper sealing ring 1/2 '' 21 x 27 x 1.5)]( "Copper sealing ring 1/2 '' 21 x 27 x 1.5)")
-
![Copper Washer 3/8'' (17 x 23 x 1,5)]( "Copper Washer 3/8'' (17 x 23 x 1,5)")
-
![Suction Filter 28 x 1,5 IG 60 Mesh]( "Suction Filter 28 x 1,5 IG 60 Mesh")
-
![Paint guns Plug-in filter 100 mesh (yellow)]( "Paint guns Plug-in filter 100 mesh (yellow)")
-
![Paint guns Plug-in filter 50 mesh (white)]( "Paint guns Plug-in filter 50 mesh (white)")
-
![Suction filter blue]( "Suction filter blue")
-
![Glass beads spreader]( "Glass beads spreader")
-
![Nozzle extension 45 cm]( "Nozzle extension 45 cm")
-
![Triopan marking (same on all three sides) Height: 70 cm - R1 Reflective]( "Triopan marking (same on all three sides) Height: 70 cm - R1 Reflective")
TRI-800.017Package: Stk. (1Pc.) -
![Marking-unit with wheel]( "Marking-unit with wheel")
-
![Prime Valve 3/8 inch]( "Prime Valve 3/8 inch")
-
![Kit Prime Valve 3/8 inch]( "Kit Prime Valve 3/8 inch")
-
![Glass beads system with conical glass beads spreader]( "Glass beads system with conical glass beads spreader")
-
![Gravity glass bead dispenser 15 cm]( "Gravity glass bead dispenser 15 cm")
-
![Gravity Glass bead dispenser 30 cm]( "Gravity Glass bead dispenser 30 cm")
-
![Paint-Bucket with Lid made of Stainless-Steel]( "Paint-Bucket with Lid made of Stainless-Steel")
-
![Glas beads dispenser - Handhold]( "Glas beads dispenser - Handhold")
-
![Circulation hose]( "Circulation hose")
-
![Plastic tool box]( "Plastic tool box")
-
![Lever for triggering the paint pistol or the rotary wheel]( "Lever for triggering the paint pistol or the rotary wheel")
-
![Point Laser Module, green laser point, 520 nm, 5 mW, 4.5 DC]( "Point Laser Module, green laser point, 520 nm, 5 mW, 4.5 DC")
-
![Holder for laser module ø 16 mm]( "Holder for laser module ø 16 mm")
-
![Flange]( "Flange")
-
![Manual airless gun short - Model C94]( "Manual airless gun short - Model C94")
-
![High pressure paint filter 30 mesh]( "High pressure paint filter 30 mesh")
-
![High pressure color filter 60 Mesh]( "High pressure color filter 60 Mesh")
-
![Locking pin for marker]( "Locking pin for marker")
-
![Holder HMC for AR 30 Pro-P, AR 30 Pro P-25]( "Holder HMC for AR 30 Pro-P, AR 30 Pro P-25")
-
![Suspension for paint gun with rotating wheel (Markeur)]( "Suspension for paint gun with rotating wheel (Markeur)")
-
![Connector DIR M 1/4 - F GIR 3/8]( "Connector DIR M 1/4 - F GIR 3/8")
-
![Plastic handle]( "Plastic handle")
-
![Airless nozzle for line markings 215]( "Airless nozzle for line markings 215")
-
![Airless nozzle for line marking 217]( "Airless nozzle for line marking 217")
-
![Airless nozzle for line markings 419]( "Airless nozzle for line markings 419")
-
![Airless nozzle for line markings 421]( "Airless nozzle for line markings 421")
-
![Airless nozzle for line markings 621]( "Airless nozzle for line markings 621")
-
![Airless nozzle for line markings 627]( "Airless nozzle for line markings 627")
-
![Airless nozzle for line marking 631]( "Airless nozzle for line marking 631")
-
![Airless nozzle for surface markings 219]( "Airless nozzle for surface markings 219")
-
![Airless nozzle for surface markings 421]( "Airless nozzle for surface markings 421")
-
![Airless nozzle for surface markings 423]( "Airless nozzle for surface markings 423")
-
![Airless nozzle for surface markings 519]( "Airless nozzle for surface markings 519")
-
![Airless nozzle for surface markings 521]( "Airless nozzle for surface markings 521")
-
![Nozzle holder for airless nozzle 11/16 '' (17.4 mm) for airless nozzles]( "Nozzle holder for airless nozzle 11/16 '' (17.4 mm) for airless nozzles")
CMC-289391Package: Stk. (1Pc.) -
![Road marking catalog]( "Road marking catalog")
