CMC AR 500 - road marking machine with different configuration possibilities

Item number: CMC-AR 500

Available in: AT, DE, CH, EU, on request

Weight: 1800 kg

Size: 365 x 110 x 210 cm

NumberPc.

Package: Stk. (1Pc.)

Remember

Request for this article ›

Description

Self-propelled airless ride-on machine for work where a large paint capacity, high marking performance and stability must be guaranteed with a compact 4-wheel ride-on machine. With matching accessories, ideal for marking 2 lines with reflective glass beads and for marking 90 cm lines in just one pass. The road marking machine can be individually configured.
Diesel engine:
- Power 44 HP
- Liquid cooling
- External alternator to charge the battery

Lights, indicators and rotating beacon

Warning sign:
for detour with arrow pointing left / right, overtaking and two flashing halogen lights

Hydraulic drive with:
- 2 motors coupled directly to the rear wheels
- Hydraulic negative brakes
- Joystick: forward, reverse and neutral control
- Pump with variable flow rate

Hydraulic oil cooler

Line/gap automat:
- C9000 with pump stroke measurement or

RMCD - Road Marking Control Device
Probably the easiest to operate system for road marking!
With high-resolution color display and the unique RMCD drive.

See our YouTube videos and the link to the RMCD website.

Parking brake:
on the front wheels

Steering:
on the front wheels, by hydraulic power steering (ZF brand)

Steering radius:
7,35 m

Telescopic visor:
for easy pre-marking or precise re-marking of existing lines

Automatic engine cut-off:
if the driver, without applying the handbrake, stands up or if someone opens the engine compartment. The seat lock can be adjusted to the driver's weight

Steering wheel:
with adjustable tilt

Seat:
with adjustable position (left / right, front / rear)

Sun canopy

Paint container:
- 500 l
- made of stainless steel
- with hydraulic agitator

Solvent tank:
for rinsing the gun and paint hose

Glass bead pressure tank:
170 l. With pressure regulator and moisture separator

Airless hydraulic piston pump:
- max. vol flow 12.5 l / min

Two-cylinder compressor:
- Air flow 827 l / min
- with pressure relief valve

Automatic marking gun:
on fixed L-carrier (height adjustable). Standard nozzle for 10-20 cm line. Line width can be adjusted from 10 cm to 30 cm by changing the nozzle and/or adjusting the gun height. The standard suspension can be replaced by a pneumatic suspension.

High pressure paint filter

Automatic glass bead gun:
Diffuser with adjustable inclination and adjustable opening angles. Delay regulator for bead gun

MAX. LINE WIDTH:
90 cm (only available with matching accessories)

Electronic line/gap automat C8000 with:
- Possibility to select 8 different presets
- Possibility of recording: Total meter (marked line + unmarked intermediate piece); Total meter of marked line
- soundSpeedAlarm: Sounds when the speed falls below the minimum speed or exceeds the maximum speed. Minimum and maximum speeds can be set. (To ensure a uniform layer thickness of the marking material).
- Allows up to 3 guns to be controlled (if machine is equipped with 3 guns)