CMC AR 30 Pro - Airless road marking machine with diaphragm pump 5.9 L/Min
Description
Simple, light and uncomplicated hand-guided road marking machine for small markings in the professional or municipal field! Equipped with a diaphragm pump.
Gasoline engine:
- Power 6 HP
- Manual starter
In a few minutes you can quickly replace the gasoline engine with the appropriate electric motor. (See the following articles)
Hand-held machine:
It is also possible to equip the AR 30 Pro with an HMC or HMC-C, the hydraulic drive carriages. (Note the follow up articles)
Parking brake:
on the rear wheel
Adjustable front wheel,
to mark tight radii. It can be locked or unlocked during work by a lever on the handlebar. Steering hardness is adjustable by a dedicated control.
Telescopic visor:
For easy initial marking or precise re-marking of existing lines.
Handlebars:
Is adjustable in height.
Holder for paint bucket:
(diameter max. 32 cm)
Airless diaphragm pump:
- max. operating pressure 210 bar
- max. volume flow 5,9 l / min
Removable paint gun:
This can be used as a manual gun for stencils or surface markings, or by a trigger handle as a gun for lines. Standard nozzle for 10-20 cm line. (Line width can vary from 5 cm to 30 cm by changing the nozzle and/or adjusting the gun height).
Marker with wheel:
To keep the distance between the paint gun and the roadway the same. (Optional)
MAX. LINES WIDTH:
- 50 cm (Only possible with suitable accessories).
Fields of application:
- Ground markings in urban/municipal areas
- Marking of symbols or areas such as safety paths
- parking lot markings
- shopping markets
- forwarding areas
- storage areas
- Marking works without emission by an electric motor (optional)
Links, Downloads and Stories! (35)
-
Links
- CMC...follow the line of experience!
- RMCD - Road Marking Control Device
-
Pdf Docs
- AR30PRO_AR30PRO-H TDS.pdf (562 KB)
- Ficha de produto CMC-MTLAR30PRO PT.pdf (3 MB)
- Ficha del producto CMC-MTLAR30PRO ES.pdf (3 MB)
- Fiche produit CMC-MTLAR30PRO FR.pdf (3 MB)
- Fișa produsului CMC-MTLAR30PRO RO.pdf (3 MB)
- Karta produktu CMC-MTLAR30PRO PL.pdf (3 MB)
- List izdelka CMC-MTLAR30PRO SL.pdf (3 MB)
- PM00013 verticale per AR30PRO.pdf (1 MB)
- Product sheet CMC-MTLAR30PRO EN.pdf (3 MB)
- Productblad CMC-MTLAR30PRO NL.pdf (3 MB)
- Produkta lapa CMC-MTLAR30PRO LV.pdf (3 MB)
- Produktark CMC-MTLAR30PRO NB.pdf (3 MB)
- Produktblad CMC-MTLAR30PRO DA.pdf (3 MB)
- Produktblad CMC-MTLAR30PRO SV.pdf (3 MB)
- Produktblatt CMC-MTLAR30PRO DE.pdf (3 MB)
- Produkto lapas CMC-MTLAR30PRO LT.pdf (3 MB)
- Produktový list CMC-MTLAR30PRO CS.pdf (3 MB)
- Produktový list CMC-MTLAR30PRO SK.pdf (3 MB)
- Scheda prodotto CMC-MTLAR30PRO IT.pdf (3 MB)
- Terméklap CMC-MTLAR30PRO HU.pdf (3 MB)
- Toote leht CMC-MTLAR30PRO ET.pdf (3 MB)
- tuoteseloste CMC-MTLAR30PRO FI.pdf (3 MB)
- Ürün sayfası CMC-MTLAR30PRO TR.pdf (3 MB)
- Φύλλο προϊόντος CMC-MTLAR30PRO EL.pdf (3 MB)
- Листок з описом продукції CMC-MTLAR30PRO UK.pdf (3 MB)
- Продуктов лист CMC-MTLAR30PRO BG.pdf (3 MB)
-
Stories on Facebook
- Brau_Union_11_2020
- Eifelpark_05_2020
- SCS_09_2020
- Spedition_03_2020
- Steiermark_11_2020
-
YouTube
- CMC - AR30PRO - YouTube
- RMCD - Road Marking Control Device - YouTube
This could be interesting as well!
-
![CMC AR 30 Pro-H - Airless road marking machine with diaphragm pump 5,9 L/min with Honda engine]( "CMC AR 30 Pro-H - Airless road marking machine with diaphragm pump 5,9 L/min with Honda engine")
CMC-MTLAR30PRO-HPackage: Stk. (1Pc.) -
![CMC - HMC drive carriage with hydraulic drive for road marking machines]( "CMC - HMC drive carriage with hydraulic drive for road marking machines")
CMC-HMC-BPackage: Stk. (1Pc.) -
![CMC AR 30 ProP-2C - Airless road marking machine with 2 piston pumps 6.17 l/min]( "CMC AR 30 ProP-2C - Airless road marking machine with 2 piston pumps 6.17 l/min")
CMC-MTLAR30PRO-P-2CPackage: Stk. (1Pc.) -
![Electric motor for AR 30 Pro / Electric Floormarkingmachine]( "Electric motor for AR 30 Pro / Electric Floormarkingmachine")
-
![Manual Paint gun C94 including 10 m Hose]( "Manual Paint gun C94 including 10 m Hose")
-
![Nozzle extension 45 cm]( "Nozzle extension 45 cm")
-
![Road marking film machine - Road Taper]( "Road marking film machine - Road Taper")
-
![CMC - CM 300 demarcation milling machine 20 cm]( "CMC - CM 300 demarcation milling machine 20 cm")
-
![Von Arx - FR 200 with petrol engine Honda]( "Von Arx - FR 200 with petrol engine Honda")
-
![Von Arx - VA 25 S with Honda petrol engine]( "Von Arx - VA 25 S with Honda petrol engine")
-
![Suction valve complete]( "Suction valve complete")
-
![Pressure regulator valve complete]( "Pressure regulator valve complete")
-
![Ball valve complete (return valve)]( "Ball valve complete (return valve)")
-
![Diaphragm pre-mounted for AR 30]( "Diaphragm pre-mounted for AR 30")
-
![Support for Diaphragm]( "Support for Diaphragm")
-
![Set of suction hose and circulation hose]( "Set of suction hose and circulation hose")
-
![Intake hose]( "Intake hose")
-
![Suction hose for vertical diaphragm pump]( "Suction hose for vertical diaphragm pump")
-
![Circulation hose]( "Circulation hose")
-
![Anti-pulsation hose]( "Anti-pulsation hose")
-
![Cable for gun release 2.500 mm]( "Cable for gun release 2.500 mm")
-
![Cable sheath for gun release cable SU00021]( "Cable sheath for gun release cable SU00021")
-
![Manometer / Pressure gauge 400 bar]( "Manometer / Pressure gauge 400 bar")
-
![Suction filter blue]( "Suction filter blue")
-
![Suction Filter 28 x 1,5 IG 60 Mesh]( "Suction Filter 28 x 1,5 IG 60 Mesh")
-
![Paint guns Plug-in filter 50 mesh (white)]( "Paint guns Plug-in filter 50 mesh (white)")
-
![Paint guns Plug-in filter 100 mesh (yellow)]( "Paint guns Plug-in filter 100 mesh (yellow)")
-
![High pressure paint hose 1/4'' 10 meter]( "High pressure paint hose 1/4'' 10 meter")
-
![Copper Washer 3/8'' (17 x 23 x 1,5)]( "Copper Washer 3/8'' (17 x 23 x 1,5)")
-
![Copper sealing ring 1/2 '' 21 x 27 x 1.5)]( "Copper sealing ring 1/2 '' 21 x 27 x 1.5)")
-
![Pneumatic wheel (front wheel) 8/3.00X4]( "Pneumatic wheel (front wheel) 8/3.00X4")
-
![ball valve 3/8'']( "ball valve 3/8''")
-
![Triopan marking (same on all three sides) Height: 70 cm - R1 Reflective]( "Triopan marking (same on all three sides) Height: 70 cm - R1 Reflective")
TRI-800.017Package: Stk. (1Pc.) -
![Glass beads spreader]( "Glass beads spreader")
-
![Glass beads dispenser - Handhold]( "Glass beads dispenser - Handhold")
-
![Marking-unit with wheel]( "Marking-unit with wheel")
-
![Cable for gun release 2.200 mm]( "Cable for gun release 2.200 mm")
-
![Prime Valve 3/8 inch]( "Prime Valve 3/8 inch")
-
![Kit Prime Valve 3/8 inch]( "Kit Prime Valve 3/8 inch")
-
![Second manual paint gun]( "Second manual paint gun")
-
![Glass beads system with conical glass beads spreader]( "Glass beads system with conical glass beads spreader")
-
![Gravity Glass bead dispenser 30 cm]( "Gravity Glass bead dispenser 30 cm")
-
![Gravity glass bead dispenser 15 cm]( "Gravity glass bead dispenser 15 cm")
-
![Paint-Bucket with Lid made of Stainless-Steel]( "Paint-Bucket with Lid made of Stainless-Steel")
-
![Plastic tool box]( "Plastic tool box")
-
![Lever for triggering the paint pistol or the rotary wheel]( "Lever for triggering the paint pistol or the rotary wheel")
-
![Point Laser Module, green laser point, 520 nm, 5 mW, 4.5 DC]( "Point Laser Module, green laser point, 520 nm, 5 mW, 4.5 DC")
-
![Holder for laser module ø 16 mm]( "Holder for laser module ø 16 mm")
-
![Flange]( "Flange")
-
![Manual airless gun short - Model C94]( "Manual airless gun short - Model C94")
-
![High pressure paint filter 30 mesh]( "High pressure paint filter 30 mesh")
-
![High pressure color filter 60 Mesh]( "High pressure color filter 60 Mesh")
-
![Locking pin for marker]( "Locking pin for marker")
-
![Motor for AR 30 Pro]( "Motor for AR 30 Pro")
-
![Holder for HMC for AR 30 PRO, AR 30 PRO-2C, L 40 and MAXX]( "Holder for HMC for AR 30 PRO, AR 30 PRO-2C, L 40 and MAXX")
-
![Suspension for paint gun with rotating wheel (Markeur)]( "Suspension for paint gun with rotating wheel (Markeur)")
-
![50 liter plastic paint tank]( "50 liter plastic paint tank")
-
![Connector DIR M 1/4 - F GIR 3/8]( "Connector DIR M 1/4 - F GIR 3/8")
-
![Copper Washer 1/4 Inch (13 x 19 x 1,5)]( "Copper Washer 1/4 Inch (13 x 19 x 1,5)")
-
![Plastic handle]( "Plastic handle")
-
![Airless nozzle for line markings 215]( "Airless nozzle for line markings 215")
-
![Airless nozzle for line marking 217]( "Airless nozzle for line marking 217")
-
![Airless nozzle for line markings 419]( "Airless nozzle for line markings 419")
-
![Airless nozzle for line markings 621]( "Airless nozzle for line markings 621")
-
![Airless nozzle for line markings 627]( "Airless nozzle for line markings 627")
-
![Airless nozzle for line marking 631]( "Airless nozzle for line marking 631")
-
![Airless nozzle for surface marking 421]( "Airless nozzle for surface marking 421")
-
![Airless nozzle for surface marking 423]( "Airless nozzle for surface marking 423")
-
![Airless nozzle for surface markings 519]( "Airless nozzle for surface markings 519")
-
![Airless nozzle for surface marking 521]( "Airless nozzle for surface marking 521")
-
![Nozzle holder for airless nozzle 11/16 '' (17.4 mm) for airless nozzles]( "Nozzle holder for airless nozzle 11/16 '' (17.4 mm) for airless nozzles")
CMC-289391Package: Stk. (1Pc.) -
![Airless nozzle for surface markings 219]( "Airless nozzle for surface markings 219")
-
![Airless nozzle for line markings 421]( "Airless nozzle for line markings 421")
-
![Parking brake complete]( "Parking brake complete")
