TH 60 - Thermo Sprayplastic Road marking machine with hydraulic drive

Item number: CMC - TH60
Available in: AT, DE, CH, EU, on request
Weight: 602 kg
Size: 185 x 75 x 160 cm
NumberPc.
Package: Stk. (1Pc.)
Remember

Description

Thermospray road marking machine with hydraulic drive.

Gasoline engine:
- power 16 HP
- electric starting, with pull start for emergency
- alternator to recharge the battery 55 A
- centrifugal pulley

Light and turning light

Hydraulic drive with:
- 2 motors directly coupled on front wheels
- hydraulic negative brakes
- lever control: controls forward, reverse and neutral gear
- VARIABLE-FLOW PUMP: guarantees more safety for operator and better performance. Allows to overcome steep slopes

Engine Cooling fan

Rear wheel with 3 possibilities of using: fixed; semi-free with springs to stripe curves, free. It can be locked or unlocked during the work by 2 pneumatic controls on dashboard

Telescopic pointer for easily following pre-marking or precisely matching the existing line, moveable to right or to left

Double safety device: "deadman" lever and emergency stop. If operator leaves the handlebars or activates the emergency stop the engine and the burner turn off, the plastic tank pressure is discharged and the circulation of diathermic oil stops

Pressurized tank for plastic:
- capacity 60 l
- with manual stirrer
- with diathermic oil heating jacket
- with circulation pump of diathermic oil for the maintaining of plastic temperature, activated by electric motor. This configuration enables to keep the engine revolutions at minimum level during the starting phase of oil heating

LPG burner with adjustable pilot flame

Thermostat with regulation of thermal differential (minimum temperature-maximum temperature)

Pressurized conic glass bead tank, capacity 20 l

Two-stage two-cylinder compressor:
- flow air rate 1000 l/min
- with pressure limiting valve

Automatic gun for plastic, movable to right or to left, with heated air of distribution. Gun head with diathermic oil heating jacket. Mounted on fixed shroud support (with adjustable height). Standard nozzle for 12- 25 cm line

Automatic glass bead gun.
- Diffuser with adjustable slope and adjustable opening angles. Closing delay regulator for bead gun

MAX. LINE WIDTH: 25 cm

Electronic spacing device:
- C8000

Downloads (2)

Last Seen

Article has been added!